-
740 PSI @ 100' F ~ 245 psi @ 180' F
- Compatible with existing tapping and plugging equipment
- Low profile
- Valve to fitting adapters
- 2" and 3" threaded plug and thread cap
- 4" through 12" flanged w/ completion plug, O-ring, blind flange and cap screws
|
- Manufactured under ISO 9001
- MTD fittings are designed, tested and manufactured to used on pipelines operating in accrodance with ASME B31.8
and DOT 192
- All welding and inspections are performed per
API-1104 and ASME section IX
- Material specification and manufacuring test reports available
- The maximum recommended working pressure and temperature should be limited to that fo pipping eqipment but not exceed that of the fitting
|
ELECTROFUSION